ربات پروازی - مجتمع الکترونیک خوارزمی

مینی کوادکوپتر
QUADCOPTER CJMCU
AVR328P + MPU6050 flight control module with charging function
Provide suitable to the four axis are modified MWC source code.
MWC CJMCU - the phantom micro four axis flight control mini flight control 6 axis module
Debugging needs certain foundation.
Need to configure the motor, remote control, receiver, battery. You can fly.
Note: a very flexible. Need to flight.
PCB size: 76 mm x 76 mm heavy gold craft,Four hollow cup motor pitch: 61 mm x 61 mm
Charging:
The micro four axis by FTDI mouth GND and 5 v foreign 1 s lithium battery recharged. Interface as shown in the figure below:
Specific operation:
Shut OFF the power switch, the four axis behind the switch to OFF.
Open the charging switch, namely four shaft switch to Char ON the right.
Connect a serial port downloader GND to mini MWC GND, 5 v to 5 v mini MWC, charging indicator Char on, the battery to charge.
Wait for Char leds put out, the Sta in LED lighting, charging is complete
-20D

Technical parameters of 20A ESC:
Continuous current: 20A
Instantaneous current: 25A
Number of lithium battery sections: 2-3S
Programmable: yes
BEC type: linear ; 2A/5V
Weight ( with line ) : 28g
Size: 55 × 28 × 7mm
Plug: not included, need to purchase 3.5mm banana plug, T plug
-48R

Technical parameters of 30A ESC:
Continuous current: 30A
Instantaneous current: 40A
Number of lithium battery sections: 2-3S
Programmable: yes
BEC type: linear ; 2A/5V
Weight ( with line ) : 28g
Size: 55 × 28 × 7mm
Plug: not included, need to purchase 3.5mm banana plug, T plug
-49R

بدنه هگزاکوپتر
-30D

power supply cable
-1.3R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
Manufacturer:AMASS:
Connector:plug:
Type of connector:DC supply:
Connector series:XT30:
Kind of connector:female:
Number of pins:2:
Mechanical mounting:for cable:
Electrical mounting:soldered:
Contact plating:gold flash:
Colour:yellow:
Current rating:30A:
Rated voltage:500V:
Flammability rating:UL94V-0:
Operating temperature:-20...120°C:
Spatial orientation :straight:
Contact material:brass:
Wire size:18AWG:
Body material:polyamide
-3.76R

Name: Four-axis aircraft general-purpose ESC connecting plate (distribution board)
Weight: 7 grams
Mounting hole distance: compatible with MK KK flight control mounting hole distance
Applicable control system: fully compatible with MK KK flight control
Connected tones: 1-8 (more than 8 may damage the connection board due to excessive current)
The whole set of 6 yuan package contains:
1. ESC wiring board × 1;
2.14AWG silica gel line - length 10cm × 2 (one red and black);
3. T plug male × 1;
4. Heat shrinkable tube.
-6.3R

Matek Genuine PDB-XT60
Product introduction:
2oz copper foil to ensure high current through;
4-layer PCB, power high current and BEC layering, to avoid interference of BEC ground wire by power current;
6 pairs of ESC power pad, suitable for X-shaped or H-shaped rack transfer arrangement;
Dual BEC: 5V / 2A synchronous rectification switching BEC, 12V / 0.5A linear BEC;
compatible sheet width smaller than 48mm frame
division resistance current collector plate 4 * 25A, short *. 30A. 4 (10s)
BEC 5V Ripple: 40mV (Vin=16V, Vout=5V@2A load)
BEC 12V linear regulator, very low ripple, will not interfere with image signal;
52*36*3mm, including XT60 total weight 11g
installation hole distance 30.5 Mm, aperture 3mm

Instructions for use:
Thepackage contains a genuine Amass XT60 plug, you need to weld the distribution board yourself;
pay attention to the input polarity, do not input reverse connection, short circuit !
Do not touch the carbon fiber board behind the distribution board, which may cause a short circuit.
With 4S, 12V regulated output can last 500mA; voltage regulation accuracy is 2.5%;
12V regulator chip also supports 3S battery input, but output voltage = 3S real-time voltage -1V;
BEC 12V can be used for a 12V camera and a 600mW picture pass.
-26.25R

-1.24R

-0.63R

-0.53R

-2R

-1R

-1.4R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
-3.76R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
Connector:plug
Type of connector:DC supply
Connector seri:XT60
Kind of connector male
Number of p:2
Mechanical mounting:for cable, holders
Electrical mounting:soldered
Contact plating:gold flash
Colour:yellow
Current rating:60A
Rated voltage:500V
Flammability rating :UL94V-0
Operating temperature:-20...120°C
Spatial orientation:straight
Contact material:brass
Wire size:12AWG
Body material:polyamide
Mechanical durability:1000cycles
Version:with locking, with holder
-3.76R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
Manufacturer:AMASS
Connector:plug
Type of connector:DC supply
Connector series:XT60
Kind of connector:female
Number of pins:2
Mechanical mounting:for cable
Electrical mounting:soldered
Contact plating:gold flash
Colour:yellow
Current rating:60A
Rated voltage:500V
Flammability rating:UL94V-0
Operating temperature:-20...120°C
Spatial orientation:straight
Contact material:brass
Wire size:12AWG
Body material:polyamide
-2.8R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
-5.4R

It is compatible to FS-GT2,FS-GT3 and FS-GT3B.
Descriptions:
Channels: 3
Model Type: Car/Boat
RF Range: 2.4055-2.475GHz
RF Channel: 140
RF Receiver Sensitivity: -105dBm
Bandwidth: 500KHz
2.4GHz System: AFHDS
Modulation Type: GFSK
Power: 4.0-6.5V DC
Antenna Length: 26mm
Weight: 5g
Size: 35*22*12mm
i-BUS Port: No
Data Acquisition Port: No
Color: Black
Certificate: CE0678, FCC
For use with FS-GT2 and GT3 Transmitter
-29.4R

Key Features
Compatible with FS-I4 FS-I6 GT2E GT2G FS-I10 FS-I6S TH9X FS-T6 CT6B GT3C CT3C FS-I4 FS-IT4S transmitters
Suitable models: Airplane/glider/helicopter
2.4G modes: automatic frequency second generation digital system

Specifications
Number of Channels: 10
Suitable models: Airplane / glider / helicopter
Frequency range :2.4-2 .48 GHz
Transmitting power: not more than 20dBm
Receiver sensitivity:-105dBm
2.4G modes: automatic frequency second generation digital systems
Encoding: GFSK
Antenna length: 26 mm * 2 (dual antenna)
Weight: 19.3 g
Input power :4.0-6 .5 V DC
Dimensions: 47 * 33.1 * 14.7 mm
Certification: CE0678, FCC
i-BUS Interface: Yes
Data acquisition interface: Yes
-90.30R

FS-R6B 2.4Ghz 6CH AFHDS Receiver for fs i6 i10 T6 CT6B TH9x
Description:
Item Name: FS-R6B Receiver
Brand Name: Flysky
100% Brand New
Channels: 6 Channels
Model type: heli/airplane
RF power: less than 20DBm
modulation: GFSK
Code type: PCM
Senditivity: 1024
Low voltage warning: LED
Charger port: yes
ANT length: 26mm
Frequency: 2.4G
Power: 5V DC(1.5V AAA*4)
weight: 25g
size: 30*25*8mm
Certificate: CE,FCC,RoH
Y11-46R

FlySky FS-R9B 8Ch 2.4Ghz RC Receiver for i6 i10 T6 CT6B TH9X Transmiter
Description:
Brand Name: FlySky
Item Name: RC Receiver
Channels: 8channels
Receiving Sensitivity: -105dBm
Frequency Range: 2.4-2.48GHz
Frequency Width: 500KHz
Wave Band: 160
Modulation: GFSK
2.4G Mode: Automatic FM digital system
Channel Resolution: 1024 classes
Power: 4.0-6.55V DC
Weight: 18g
Antenna Length: 26mm
Size: 52*35*15mm
Usage: suit for Fixed-wing copters, helicopters, etc
Package size: 10 * 10 * 2 cm / 4 * 4 * 0.8 in
Package weight: 21 g / 0.7 oz
Y11-60R

red / black positive and negative propeller set 45mm fan 0.8mm aperture hollow cup motor parts